Brake Vacuum Pump - 1.6L EcoBoost (132kW/180PS) - Sigma

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Torque : 10 Nm

1. Torque : 10 Nm

1. NOTE: Make sure the mating surfaces are clean and free of foreign material and thread lock residue is cleaned from the bolt holes.

Installation

1. NOTICE: If the brake vacuum pump is not secured within 10 minutes of sealant application, the sealant must be removed and the sealing area cleaned with metal surface prep. Failure to follow this procedure can cause future oil leakage.

   Material : Flange Sealant - Anaerobic / Loctite® 51031 (WSK-M2G348-A7)

1. NOTE: Manually align the brake vacuum pump drive key with the camshaft slot before installation.

   To install, reverse the removal procedure.
   

Copyright © Ford Motor Company