| 307-05 Automatic Transmission External Controls - Vehicles With: 6-Speed PowerShift Transmission - DPS6/6DCT250 | 2014 Fiesta |
| Description and Operation | Procedure revision date: 05/17/2013 |
The selector lever cable is clipped onto a ball head on the selector lever. At the transmission the selector lever cable is clipped onto a ball head on the selector shaft lever. The cable is moved in an axial direction by operation of the selector lever. The axial movement is converted into a rotational movement of the selector shaft by the selector shaft lever. The selector lever cable adjuster is located at the transmission end of the cable.
Selector Lever with SelectShift™ Switch
| Item | Description |
|---|---|
| 1 | Parking lock release button |
| 2 | SelectShift™ switch |
| 3 | Selector lever assembly |
| 4 | Brake shift interlock actuator cover |
| 5 | Brake shift interlock actuator lever |
| 6 | Brake shift interlock actuator solenoid |
The selector lever with a SelectShift™ switch has the following positions:
In the selector lever position S , the transmission can be manually shifted by operating the SelectShift™ switch which is located on the side of the selector lever. The SelectShift™ switch is hard-wired to the TCM . The upshift or downshift signal is transmitted to the TCM via two wires.
The selector lever can be moved out of the P position only with the ignition switched on, the brake pedal pressed and the parking lock release button pressed.
The following components are integrated in the selector lever with a SelectShift™ switch assembly:
Copyright © Ford Motor Company