Brake Pads

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
   

1. 1. NOTICE: Make sure that no load is placed on the brake hose.

      Torque : 11 Nm
   2. Torque : 35 Nm

1. NOTICE: Make sure that the mating faces are clean and free of foreign material.

   NOTE: Note the position of the components before removal.

1. General Equipment : Brake Caliper Piston Retractor

Installation

1. To install, reverse the removal procedure.
   

1. Depress the brake pedal, check the brake fluid level in the brake fluid reservoir and top up as necessary with brake fluid.
   Material : Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid / PM-20 (WSS-M6C65-A2) (ISO 4925 Class 6)

Copyright © Ford Motor Company