206-04 Rear Disc Brake 2014 Fiesta
Removal and Installation Procedure revision date: 03/7/2013

Rear Brake Flexible Hose

Removal

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

NOTE: Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. NOTICE: Make sure that all openings are sealed.

    NOTICE: Make sure that the brake hose is not twisted and is correctly located.

    1. Torque : 11 Nm
    1. Torque : 18 Nm
    1. Torque : 18 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Refer to: Component Bleeding (206-00 Brake System - General Information, General Procedures).