501-28 Roof Sheet Metal Repairs 2014 Fiesta
Removal and Installation Procedure revision date: 03/1/2013

Roof Panel - Vehicles With: 4-Door, Roof Opening Panel

Removal

WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

  1. NOTICE: Adequately protect all glass, exterior finish and interior trim from contamination during entire repair procedure.

    Refer to: Body Repair Health and Safety and General Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).
  1. Refer to: Headliner - Vehicles With: 4-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
  1. Refer to: Side Curtain Airbag (501-20B Supplemental Restraint System, Removal and Installation).
  1. Refer to: Audio Unit Antenna (415-00C Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC/Touchscreen Display, Removal and Installation).
  1. Remove and discard.
  1. Refer to: Windshield Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).
  1. Refer to: Rear Window Glass - Vehicles With: 4-Door (501-11 Glass, Frames and Mechanisms, Removal and Installation).
  1. Refer to: Roof Opening Panel Frame (501-17 Roof Opening Panel, Removal and Installation).
  1. Leave as much of the foam intact as possible on the roof bows.
    General Equipment : Knife
  1. General Equipment : Spot Weld Drill Bit
  1. General Equipment : Spot Weld Drill Bit

Installation

NOTICE: Adequately protect all glass, exterior finish and interior trim from contamination during entire repair procedure.

  1. Remove e-coat where indicated.
  1. Material : Metal Bonding Adhesive / TA-1
  1. General Equipment : Locking Pliers
  1. General Equipment : Resistance Spotwelding Equipment
  1. General Equipment : Resistance Spotwelding Equipment
  1. Apply a Ford approved primer.
  1. Material : Seam Sealer / TA-2
  1. Install NVH butyl mastic pads (obtain locally).
  1. Material : Fusor® Flexible Foam Repair / 121
  1. Refinish the exterior using a Ford approved paint system.
  1. Refer to: Roof Opening Panel Frame (501-17 Roof Opening Panel, Removal and Installation).
    Refer to: Roof Opening Panel Glass (501-17 Roof Opening Panel, Removal and Installation).
  1. Refer to: Side Curtain Airbag (501-20B Supplemental Restraint System, Removal and Installation).
  1. Refer to: Audio Unit Antenna (415-00C Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC/Touchscreen Display, Removal and Installation).
  1. Refer to: Headliner - Vehicles With: 4-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
  1. Refer to: Windshield Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).
  1. Refer to: Rear Window Glass - Vehicles With: 4-Door (501-11 Glass, Frames and Mechanisms, Removal and Installation).
  1. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).