308-03B Manual Transmission - Vehicles With: 6-Speed Manual Transmission - B6 2014 Fiesta
Disassembly and Assembly of Subassemblies Procedure revision date: 04/25/2013

Input Shaft

DISASSEMBLY

  1. General Equipment : Hydraulic Press
    General Equipment : Bearing Separator
  1. NOTICE: Use vise jaw protectors.

    1. General Equipment : Vise
    1. General Equipment : Vise Jaw Protectors
  1. General Equipment : Hot Air Gun
  1. Special Tool(s) : 211-014 Remover, Steering Wheel
  1. General Equipment : Bearing Separator
    General Equipment : Hydraulic Press
  1. NOTE: Note the position of the components before removal.

  1. General Equipment : Bearing Separator
    General Equipment : Hydraulic Press

ASSEMBLY

  1. NOTICE: Use vise jaw protectors.

    1. General Equipment : Vise
    1. General Equipment : Vise Jaw Protectors
  1. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
  1. Special Tool(s) : 205-199 (T83T-3132-A1) Installer, Spindle/Axle Shaft
    1. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
    1. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
    1. NOTE: Make sure that the components are installed to the position noted before removal.

    1. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
  1. Special Tool(s) : 205-199 (T83T-3132-A1) Installer, Spindle/Axle Shaft
    General Equipment : Hydraulic Press
    1. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
    1. Material : Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
  1. Special Tool(s) : 205-D015 (D80L-630-4) Step Plate
    General Equipment : Hydraulic Press
  1. Torque : 110 Nm
    1. Special Tool(s) : 307-679 Installer, Countershaft Needle Bearing
      General Equipment : Hydraulic Press