Powertrain/Drivetrain Mount Neutralizing

NOTE: Refer to the appropriate 303-01 section and procedure for special instructions on loosening and tightening mount fasteners.

1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
   

1. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
   

1. Lower the vehicle.
   

1. NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

   Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
   

1. Raise and support the vehicle.
   

1. Tighten the powertrain/drivetrain mount fasteners.
   

1. Lower the vehicle.
   

1. Test the system for normal operation.
   

Copyright © Ford Motor Company