206-03 Front Disc Brake 2014 Fiesta
Removal and Installation Procedure revision date: 08/20/2013

Front Brake Flexible Hose

Removal

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

NOTICE: Make sure that all openings are sealed.

NOTE: Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. Torque : 26 Nm
    1. Torque : 18 Nm
    1. Torque : 25 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Refer to: Component Bleeding (206-00 Brake System - General Information, General Procedures).


Copyright © Ford Motor Company