Audio Front Control Module (ACM)

Removal

NOTE: If the ACM did not respond to the diagnostic scan tool, As-Built Data may need to be entered as part of the repair.

1. NOTE: This step is only necessary when installing a new component.

   NOTE: The PMI process must begin with the current ACM installed. If the current ACM does not respond to the diagnostic scan tool, the tool may prompt for As-Built Data as part of the repair.

   Using a diagnostic scan tool, begin the PMI process for the ACM following the on-screen instructions.
   

1. Refer to: Front Controls Interface Module (FCIM) (415-00A Information and Entertainment System - General Information - Vehicles With: AM/FM/CD, Removal and Installation).
   

Installation

1. To install, reverse the removal procedure.
   

1. NOTE: This step is only necessary when installing a new component.

   2. Using a diagnostic scan tool, complete the PMI process for the ACM following the on-screen instructions.
   

Copyright © Ford Motor Company