415-00C Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC/Touchscreen Display 2014 Fiesta
Removal and Installation Procedure revision date: 05/20/2013

Front Controls Interface Module (FCIM)

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. NOTE: This step is only necessary when installing a new component.

    NOTE: The PMI must begin with the current FCIM installed. If the current FCIM does not respond to the diagnostic scan tool, the tool may prompt for As-Built Data as part of the repair.

    Using a diagnostic scan tool, begin the PMI process for the FCIM following the on-screen instructions.
  1. Refer to: Instrument Panel Center Upper Trim Panel (501-12 Instrument Panel and Console, Removal and Installation).
  1. Torque : 2.5 Nm

Installation

  1. To install, reverse the removal procedure.

  1. NOTE: This step is only necessary when installing a new component.

    2. Using a diagnostic scan tool, complete the PMI process for the FCIM following the on-screen instructions.


Copyright © Ford Motor Company