Clockspring

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Steering Wheel (211-04 Steering Column, Removal and Installation).
   

1. Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation).
   

Installation

1. NOTICE: If installing a new clockspring, do not remove the clockspring anti-rotation key until the steering wheel is installed. If the anti-rotation key has been removed before installing the steering wheel, the clockspring must be centered. Failure to follow this instruction may result in component damage and/or system failure.

   NOTE: This step is only necessary if adjustment or centralizing is required.

   Refer to: Clockspring Adjustment (501-20B Supplemental Restraint System, General Procedures).
   

1. To install, reverse the removal procedure.
   

1. NOTE: To install, remove the anti-rotation key from a new clockspring after installing the steering wheel.

   Refer to: Steering Wheel (211-04 Steering Column, Removal and Installation).
   

Copyright © Ford Motor Company