501-20B Supplemental Restraint System 2014 Fiesta
Removal and Installation Procedure revision date: 08/6/2013

Front Impact Severity Sensor

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Depower the SRS .
    Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).
  1. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).

LH sensor

  1. NOTE: With active grill shutter shown, without similar.

    1. Torque : 10.5 Nm

RH sensor with active grill shutter

  1. Torque : 9 Nm
    1. On both sides.

RH sensor

  1. NOTE: With active grill shutter shown, without similar.

    Torque : 10.5 Nm

Installation

  1. NOTE: Make sure the front impact severity sensor mating surfaces are clean and free of foreign material.

    To install, reverse the removal procedure.
  1. Repower the SRS .
    Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).


Copyright © Ford Motor Company