412-00 Climate Control System - General Information 2014 Fiesta
Removal and Installation Procedure revision date: 03/26/2013

Air Distribution Door Actuator

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: Driver Knee Airbag (501-20B Supplemental Restraint System, Removal and Installation).
  1. NOTE: If replacing the air distribution door actuating assembly, perform the following steps.

    Refer to: Heater Core and Evaporator Core Housing - Vehicles With: Electronic Automatic Temperature Control (EATC) (412-00 Climate Control System - General Information, Removal and Installation).
    Refer to: Heater Core and Evaporator Core Housing - Vehicles With: Electronic Manual Temperature Control (EMTC) (412-00 Climate Control System - General Information, Removal and Installation).

Installation

  1. To install, reverse the removal procedure.
  1. NOTE: When installing the air distribution door actuating assembly, make sure that each air distribution door gear or lever is correctly aligned with the actuating assembly.