303-03A Engine Cooling - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/15/2013

Thermostat

Removal

  1. Refer to: Cooling System Draining and Vacuum Filling (303-03A Engine Cooling - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, General Procedures).
  1. Remove the following items:
  1. General Equipment : Hose Clamp Remover/Installer

  1. NOTICE: Note the position of the component before removal.

Installation

  1. NOTE: Make sure that the component is installed to the position noted before removal.

  1. NOTE: Install all the bolts finger tight before final tightening.

    Torque : 9 Nm
  1. General Equipment : Hose Clamp Remover/Installer
  1. Install the following items:
  1. Refer to: Cooling System Draining and Vacuum Filling (303-03A Engine Cooling - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, General Procedures).


Copyright © Ford Motor Company