206-05 Parking Brake and Actuation 2014 Fiesta
Removal and Installation Procedure revision date: 04/11/2013

Parking Brake Cable

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).
  1. On both sides.
    Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. On both sides.
    General Equipment : Flat Headed Screw Driver
  1. On both sides.
  1. On both sides.

Installation

  1. Torque : 5 Nm
  1. On both sides.
  1. On both sides.
  1. On both sides.
  1. Torque : 40 Nm
  1. On both sides.
  1. On both sides.
    General Equipment : Caliper Gauge
  1. On both sides.
  1. Adjust the parking brake cable adjustment nut until the allen key falls out.
  1. On both sides.
  1. On both sides.
  1. On both sides.
  1. Adjust the parking brake cable adjustment nut until the allen key falls out.
  1. On both sides.
    Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).


Copyright © Ford Motor Company