419-01C Passive Anti-Theft System (PATS) - Vehicles With: Keyless Entry and Push Button Start 2014 Fiesta
General Procedures Procedure revision date: 08/1/2012

Key Programming Using Diagnostic Equipment

  1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. NOTE: To enter the PATS security access if no programmed passive keys are available, start a vehicle session using a tear tag or PCM part number. The PATS security access can still be granted even with the ignition off.

    Refer to: Diagnostic Methods (100-00 General Information, Description and Operation).
  1. From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the on-screen instructions to enter PATS security access.
  1. NOTE: A maximum of 8 keys can be programmed into the vehicle.

    From the diagnostic scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to program the passive key(s).