204-01 Front Suspension 2014 Fiesta
Removal and Installation Procedure revision date: 09/23/2008

Front Stabilizer Bar Bushing


NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
  1. Torque : 48 Nm
  1. NOTE: Note the position of each component before removal.


  1. NOTE: Make sure that the mating faces are clean and free of foreign material.

    NOTE: Make sure that these components are installed to the noted removal position.

  1. NOTE: Make sure that the clamp is installed to the same orientation as when removed.

    On both sides.
  1. To install, reverse the removal procedure.