206-03 Front Disc Brake 2014 Fiesta
Removal and Installation Procedure revision date: 03/7/2013

Brake Caliper


NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: Brake and Clutch Systems Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

    NOTICE: Make sure that all openings are sealed.

    Torque : 26 Nm
  1. Torque : 26 Nm


  1. To install, reverse the removal procedure.
  1. Refer to: Component Bleeding (206-00 Brake System - General Information, General Procedures).