307-05 Automatic Transmission External Controls - Vehicles With: 6-Speed PowerShift Transmission - DPS6/6DCT250 2014 Fiesta
General Procedures Procedure revision date: 08/16/2013

Selector Lever Cable Adjustment

  1. Refer to: Air Cleaner (303-12A Intake Air Distribution and Filtering - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
    Refer to: Air Cleaner (303-12 Intake Air Distribution and Filtering - 1.25L Duratec-16V (44kW/60PS) - Sigma/1.25L Duratec-16V (60kW/82PS) - Sigma/1.4L Duratec-16V (70kW/95PS) - Sigma/1.4L Duratec-16V (71kW/96PS) - Sigma/1.4L Duratec-16V Flex Fuel (71kW/96PS) - Sigma/1.6L Duratec-16V Ti-VCT (77kW/105PS) - Sigma/1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma/1.6L Duratec-16V Ti-VCT (99kW/134PS) - Sigma) .

  1. NOTICE: Only use moderate force.

    NOTICE: Take extra care not to damage the clips.

  1. NOTICE: Only use moderate force.

    NOTICE: Take extra care not to damage the clips.

  1. Start and run the engine at idle.
  1. Fully apply the brake pedal and parking brake.

  1. NOTE: Make sure that the selector lever and the gearshift mechanism are in the park (P) position.

  1. Refer to: Air Cleaner (303-12A Intake Air Distribution and Filtering - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
    Refer to: Air Cleaner (303-12 Intake Air Distribution and Filtering - 1.25L Duratec-16V (44kW/60PS) - Sigma/1.25L Duratec-16V (60kW/82PS) - Sigma/1.4L Duratec-16V (70kW/95PS) - Sigma/1.4L Duratec-16V (71kW/96PS) - Sigma/1.4L Duratec-16V Flex Fuel (71kW/96PS) - Sigma/1.6L Duratec-16V Ti-VCT (77kW/105PS) - Sigma/1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma/1.6L Duratec-16V Ti-VCT (99kW/134PS) - Sigma) .


Copyright © Ford Motor Company