| 308-03B Manual Transmission - Vehicles With: 6-Speed Manual Transmission - B6
|
2014 Fiesta
|
| Disassembly and Assembly of Subassemblies
|
Procedure revision date:
04/25/2013
|
Differential
DISASSEMBLY
NOTICE:
Use vise jaw protectors.
-
Clamp the differential in a vise.
-
General Equipment
: Bearing Separator
General Equipment
: Puller
-
General Equipment
: Bearing Separator
General Equipment
: Puller
-
Remove the following items:
-
Loosen
:
Four turn(s)
-
-
Save four bolts for reassembly the ring gear.
-
ASSEMBLY
NOTICE:
Use vise jaw protectors.
-
Clamp the differential in a vise.
-
NOTE:
Make sure that the mating faces are clean and free of foreign material.
-
Install the four bolts saved during disassembly.
-
Tighten each bolt 1 turn at a time in the sequence shown.
Torque
:
50 Nm
-
-
Tighten each bolt 1 turn at a time.
Torque
:
Stage 1:
50 Nm
Stage 2:
90°
-
The roller bearing must not be lubricated.
Special Tool(s)
: 205-062 Installer, Differential Bearing
-
The roller bearing must not be lubricated.
Special Tool(s)
: 205-062 Installer, Differential Bearing
Copyright © Ford Motor Company
