Oil Cooler

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
   

1. NOTE: Lubricate the engine oil filter gasket with clean engine oil prior to installing the oil filter.

   General Equipment : Oil Drain Equipment
   General Equipment : Strap Wrench
   Material : Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)
   Torque : 14.5 Nm

1. General Equipment : Locking Pliers

1. NOTICE: If metal or aluminum material is present in the oil cooler, mechanical concerns exist. Failure to correct these concerns may cause engine failure.

   To diagnose mechanical concerns.
   Refer to: Engine (303-00 Engine System - General Information, Diagnosis and Testing).
   Torque : 55 Nm

Installation

1. To install, reverse the removal procedure.
   

Copyright © Ford Motor Company