501-11 Glass, Frames and Mechanisms 2014 Fiesta
Removal and Installation Procedure revision date: 07/30/2013

Front Door Window Control Switch


NOTE: Driver side shown, passenger side similar.


  1. To install, reverse the removal procedure.

Vehicles With: One-Touch Up and Down Driver Window

  1. NOTE: The master window control switch and the LH window motor must be initialized whenever battery voltage has been removed from the driver window control switch for greater than 3 minutes (for example, the battery or the master window switch is disconnected) or if a new driver window control switch is installed.

    Refer to: Power Door Window Initialization - Vehicles With: One-Touch Up and Down Driver Window/One-Touch Up and Down Front Windows (501-11 Glass, Frames and Mechanisms, General Procedures).