501-05 Interior Trim and Ornamentation 2014 Fiesta
Removal and Installation Procedure revision date: 03/19/2013

B-Pillar Trim Panel


NOTE: LH side shown, RH side similar.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: To avoid damage to the trim panels, remove any retaining clips from the body and attach them to the trim panels before installing.

  1. NOTE: Inspect the safety belt D-ring cover for damage and replace D-ring cover if damaged.

  1. NOTE: During installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

    Torque : 40 Nm
  1. Torque : 6 Nm


  1. To install, reverse the removal procedure.