206-09 Anti-Lock Brake System (ABS) and Stability Control 2014 Fiesta
Removal and Installation Procedure revision date: 04/11/2013

Hydraulic Control Unit (HCU)

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. If installing a new HCU / ABS module, connect the scan tool and upload the module configuration information from the ABS module.
    Refer to: Module Configuration - System Operation and Component Description (418-01 Module Configuration, Description and Operation).
  1. Torque : 8 Nm
    1. Torque : 18 Nm
    1. Torque : 23 Nm

Installation

  1. To install, reverse the removal procedure.
  1. If a new HCU / ABS module was installed, download the module configuration information from the scan tool.
    Refer to: Module Configuration - System Operation and Component Description (418-01 Module Configuration, Description and Operation).
  1. Refer to: Brake System Bleeding (206-00 Brake System - General Information, General Procedures).


Copyright © Ford Motor Company