205-04 Front Drive Halfshafts 2014 Fiesta
Removal and Installation Procedure revision date: 03/12/2013

Inner Constant Velocity (CV) Joint Boot

Removal

  1. Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).
    Refer to: Front Halfshaft RH (205-04 Front Drive Halfshafts, Removal and Installation).
  1. General Equipment : Puller
    General Equipment : Bearing Separator

Installation

  1. Special Tool(s) : 205-343 (T95P-3514-A) Installer, Constant Velocity Joint Boot Clamp

  1. NOTE: Make sure that a new component is installed.

    General Equipment : Vise

  1. NOTE: Grease sachet is supplied with boot kit.

    Material : Constant Velocity Joint Grease (High Temperature) / XG-5 (WSS-M1C258-A1)
  1. Material : Constant Velocity Joint Grease (High Temperature) / XG-5 (WSS-M1C258-A1)
  1. General Equipment : Flat Headed Screw Driver
  1. Special Tool(s) : 205-343 (T95P-3514-A) Installer, Constant Velocity Joint Boot Clamp
  1. Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).
    Refer to: Front Halfshaft RH (205-04 Front Drive Halfshafts, Removal and Installation).


Copyright © Ford Motor Company