501-20A Safety Belt System 2014 Fiesta
General Procedures Procedure revision date: 03/8/2012

Safety Belt Twisted at the Safety Belt Guide

  1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. If necessary, remove the B-pillar trim panel.
    Refer to: B-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
  1. NOTE: Typical D-ring shown, others similar.

    Grasp the safety belt webbing at the D-ring and fold the twisted portion of the safety belt webbing over itself.
  1. Feed the folded portion of the safety belt webbing through the D-ring to remove the twist from the safety belt webbing.