501-20A Safety Belt System 2014 Fiesta
Removal and Installation Procedure revision date: 04/30/2013

Rear Center Safety Belt Retractor - Vehicles With: 5-Door

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Remove the 60 percent backrest.
    Refer to: Rear Seat Backrest (501-10 Seating, Removal and Installation).
  1. Torque : 38 Nm
  1. On both sides.
  1. Torque : 48 Nm

Installation

  1. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

    To install, reverse the removal procedure.
  1. Check the active restraint system for correct operation.
    Refer to: Safety Belt System (501-20A Safety Belt System, Diagnosis and Testing).


Copyright © Ford Motor Company