501-20A Safety Belt System 2014 Fiesta
Removal and Installation Procedure revision date: 04/30/2013

Safety Belt Shoulder Height Adjuster


NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: B-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
  1. Torque : 40 Nm


  1. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

    To install, reverse the removal procedure.
  1. Check the active restraint system for correct operation.
    Refer to: Safety Belt System (501-20A Safety Belt System, Diagnosis and Testing).