414-01 Battery, Mounting and Cables 2014 Fiesta
General Procedures Procedure revision date: 04/18/2013

Battery Disconnect and Connect

  1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).

NOTE: Battery cable with a battery monitoring sensor shown. Battery cable without a battery monitoring sensor similar.

  1. Torque : 5 Nm
  1. NOTE: To interrupt power to the vehicle electrical system, disconnect the battery ground cable only. It is not necessary to disconnect the positive battery cable.

    Torque : 5 Nm
  1. To install, reverse the removal procedure.
  1. If equipped with power windows, perform the window motor initialization.
    Refer to: Power Door Window Initialization - Vehicles With: One-Touch Up and Down Driver Window/One-Touch Up and Down Front Windows (501-11 Glass, Frames and Mechanisms, General Procedures).