303-06B Starting System - 1.6L EcoBoost (132kW/180PS) - Sigma
2014 Fiesta
General Procedures
Procedure revision date:
05/1/2013
Starter Motor Drive Gear and Flywheel Ring Gear Inspection
Refer to:
Starter Motor
(303-06B Starting System - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
Check the wear patterns on the starter drive gear and the flywheel or flexplate ring gear. If the wear pattern is normal,
install the starter motor.
Refer to:
Starter Motor
(303-06B Starting System - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
If the starter drive gear and the flywheel or flexplate ring gear are not fully meshing and the gears are scored or damaged,
install a new starter motor.
Refer to:
Starter Motor
(303-06B Starting System - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
If necessary, install a new flywheel or flexplate.
Refer to:
Flywheel
(303-01B Engine - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
