501-20B Supplemental Restraint System 2014 Fiesta
Removal and Installation Procedure revision date: 04/30/2013

Driver Knee Airbag

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Depower the SRS .
    Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).
    1. Torque : 8 Nm

    1. NOTICE: Do not pull the knee air bag module electrical connector out by the locking button. Damage to the locking button can occur.

      NOTE: Follow the unique instructions or graphic for this step in installation.

Installation

  1. NOTICE: Make sure the knee air bag module electrical connector locking button is in the released position when connected. Do not install the knee air bag module electrical connector by the locking button. Failure to follow these instructions may cause connector damage.

    To install, reverse the removal procedure.
  1. Repower the SRS .
    Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).


Copyright © Ford Motor Company