Passenger Airbag

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Depower the SRS .
   Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).
   

1. Torque : 6 Nm

1. Torque : 6 Nm

1. NOTICE: Do not pull the passenger air bag module electrical connectors out by the locking button. Damage to the locking buttons can occur.

   NOTE: Follow the unique instructions or graphic for this step in installation.

Installation

1. NOTICE: Make sure the passenger air bag module electrical connector locking buttons are in the released position when connected. Do not install the passenger air bag module electrical connectors by the locking buttons. Failure to follow these instructions may cause connector damage.

   To install, reverse the removal procedure.
   

1. Repower the SRS .
   Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).
   

Copyright © Ford Motor Company