303-08B Engine Emission Control - 1.6L EcoBoost (132kW/180PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/1/2013

Crankcase Vent Oil Separator


NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: Intake Manifold (303-01B Engine - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
  1. Refer to: Starter Motor (303-06B Starting System - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).


NOTICE: Make sure that the mating faces are clean and free of foreign material.

  1. Lubricate the spigot O-ring seal with clean engine oil.
    Material : Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)
  1. NOTE: Push the spigot into the engine block.

    Start all of the bolts finger tight.
    Torque :
      Stage 1:  bolts 1, 2 and 3 to 5.5 Nm
      Stage 2:  bolts 4, 5, 6, 7 and 8 to 5.5 Nm
      Stage 3:  all bolts in sequence to 9.5 Nm
  1. To install, reverse the removal procedure.