303-08A Engine Emission Control - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/1/2013

Crankcase Vent Oil Separator


NOTE: Removal steps in this procedure may contain installation details.

  1. Refer to: Intake Manifold (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
  1. Torque : 10 Nm


NOTICE: Make sure that the mating faces are clean and free of foreign material.

  1. To install, reverse the removal procedure.