Crankshaft Front Seal

Removal

1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Refer to: Timing Belt (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
   

1. Install Special Service Tool : 100-001 (T50T-100-A) Slide Hammer , 303-175 (T82L-6316-A) Installer, Crankshaft Vibration Damper

Installation

1. NOTE: Make sure that the mating faces are clean and free of foreign material.

   Special Tool(s) : 303-175 (T82L-6316-A) Installer, Crankshaft Vibration Damper , 303-335 (T88T-6701-A) Installer, Front Cover Oil Seal , 303-420 (T92P-6701-BH) Installer, Crankshaft Front Oil Seal
   Material : Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)

1. Refer to: Timing Belt (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
   

Copyright © Ford Motor Company