303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/2/2013

Engine Mount

Removal

  1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Install the following items:

  1. NOTICE: The engine mount studs must be held while removing the engine mount nuts or damage to the powertrain mount may occur.

Installation

  1. NOTICE: The engine mount studs must be torqued or damage to the powertrain mount may occur.

    Torque : 8 Nm
  1. Torque : 48 Nm
  1. Torque : 80 Nm
  1. Remove the following items:


Copyright © Ford Motor Company