Lower Arm

Removal

NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
   

1. NOTICE: Do not use a prying device or separator fork between the ball joint and the wheel knuckle. Damage to the ball joint or ball joint seal may result. Only use the pry bar by inserting it into the lower arm body opening.

   NOTICE: Use care when releasing the lower arm and wheel knuckle into the resting position or damage to the ball joint seal may occur.

Installation

1. Only tighten the bolts finger tight at this stage.
   

1. Torque :
     Stage 1:  63 Nm
     Stage 2:  180°

1. Torque : 52 Nm

1. Torque :
     Stage 1:  63 Nm
     Stage 2:  180°

1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
   

1. Refer to: Front Toe Adjustment (204-00 Suspension System - General Information, General Procedures).
   

Copyright © Ford Motor Company