204-02 Rear Suspension 2014 Fiesta
Removal and Installation Procedure revision date: 05/2/2013

Wheel Knuckle - 1.6L EcoBoost (132kW/180PS) - Sigma

Removal

NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

  1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Brake Disc (206-04 Rear Disc Brake, Removal and Installation).

Installation

  1. Torque : 25 Nm
    1. Torque :
        Stage 1:  Loosen: 90°
        Stage 2:  25 Nm
        Stage 3:  50°
    1. Torque :
        Stage 1:  Loosen: 90°
        Stage 2:  25 Nm
        Stage 3:  50°
    1. Torque :
        Stage 1:  Loosen: 90°
        Stage 2:  25 Nm
        Stage 3:  50°
    1. Torque :
        Stage 1:  Loosen: 90°
        Stage 2:  25 Nm
        Stage 3:  50°
  1. NOTE: Make sure that the area around the component is clean and free of foreign material.

    Torque : 9 Nm
  1. Refer to: Brake Disc (206-04 Rear Disc Brake, Removal and Installation).