310-01B Fuel Tank and Lines - 1.6L EcoBoost (132kW/180PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/7/2013

Fuel Lines

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. Remove the Fuel Tank.
    Refer to: Fuel Tank (310-01B Fuel Tank and Lines - 1.6L EcoBoost (132kW/180PS) - Sigma, Removal and Installation).
  1. Refer to: Quick Release Coupling (310-00B Fuel System - General Information - 1.6L EcoBoost (132kW/180PS) - Sigma, General Procedures).
  1. NOTE: Some residual fuel may remain in the fuel tubes after releasing the fuel system pressure. When disconnecting or removing any fuel tubes, carefully drain any residual fuel into a suitable container.

    Refer to: Quick Release Coupling (310-00B Fuel System - General Information - 1.6L EcoBoost (132kW/180PS) - Sigma, General Procedures).
    Refer to: Spring Lock Couplings (310-00B Fuel System - General Information - 1.6L EcoBoost (132kW/180PS) - Sigma, General Procedures).
    Torque : 17.5 Nm
  1. Refer to: Quick Release Coupling (310-00B Fuel System - General Information - 1.6L EcoBoost (132kW/180PS) - Sigma, General Procedures).
    Torque : 17.5 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Bleed the brake system.
    Refer to: Brake System Bleeding (206-00 Brake System - General Information, General Procedures).