Condenser - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information, General Procedures).
   

1. NOTICE: Make sure that all openings are sealed.

   Torque : 8 Nm

1. Refer to: Radiator (303-03A Engine Cooling - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
   

1. NOTICE: Make sure that all openings are sealed.

   Torque : 8 Nm

Installation

NOTE: Install new O-ring seals.

1. To install, reverse the removal procedure.
   

1. Refer to: Refrigerant Oil Adding (412-00 Climate Control System - General Information, General Procedures).
   

Copyright © Ford Motor Company