303-03A Engine Cooling - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 05/15/2013

Degas Bottle

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.

    Release the cooling system pressure by slowly turning the coolant expansion tank cap between 2 and 3 turns.

  1. NOTICE: Make sure that no strain is placed on the refrigerant lines.

    Torque : 10 Nm
  1. General Equipment : Hose Clamp(s)

Installation

  1. To install, reverse the removal procedure.
    Material : Motorcraft® Orange Antifreeze/Coolant Prediluted / VC-3DIL-B (WSS-M97B44-D2)


Copyright © Ford Motor Company