501-03 Body Closures 2014 Fiesta
General Procedures Procedure revision date: 05/9/2013

Front Door Alignment

  1. Check body to front door dimensions.
    Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).

NOTE: Removal steps in this procedure may contain installation details.

NOTE: LH shown, RH similar.

All alignments

Front door in and out, up and down alignment

  1. Loosen : 2 turn(s)
  1. Adjust door to specification.
    Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
  1. Torque : 24 Nm

Front door fore, aft and tilt alignment

  1. On driver side:
  1. Refer to: Driver Knee Airbag (501-20B Supplemental Restraint System, Removal and Installation).
  1. On driver side:
    Loosen : 2 turn(s)
  1. On passenger side:
  1. On passenger side:
    Loosen : 2 turn(s)
    1. Loosen : 2 turn(s)
    1. If equipped.
      Loosen : 2 turn(s)
  1. Adjust door to specification.
    Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
    1. Torque : 25 Nm
    1. If equipped.
      Torque : 12 Nm
  1. On driver side:
    Torque : 25 Nm
  1. On passenger side:
    Torque : 25 Nm

All alignments

  1. Torque : 25 Nm
  1. Check body to front door dimensions.
    Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
  1. Install the removed components.