206-02 Drum Brake 2014 Fiesta
Removal and Installation Procedure revision date: 04/11/2013

Brake Shoes

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. General Equipment : Flat Headed Screw Driver

Installation

  1. Material : Silicone Brake Caliper Grease and Dielectric Compound / XG-3-A (ESE-M1C171-A)
  1. To install, reverse the removal procedure.
  1. NOTE: The brake shoes and parking brake cables must both be adjusted to assure correct rear drum brake and parking brake system operation.

    Refer to: Parking Brake Cable Adjustment (206-05 Parking Brake and Actuation, General Procedures).