310-02 Acceleration Control - 1.25L Duratec-16V (44kW/60PS) - Sigma/1.25L Duratec-16V (60kW/82PS) - Sigma/1.3L Z6 (83PS) - BZ/1.4L Duratec-16V (70kW/95PS) - Sigma/1.4L Duratec-16V (71kW/96PS) - Sigma/1.4L Duratec-16V Flex Fuel (71kW/96PS) - Sigma/1.5L Z6 (101PS) - BZ/1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma/1.6L Duratec-16V Ti-VCT (99kW/134PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 02/26/2013

Accelerator Pedal

Removal

NOTE: Removal steps in this procedure may contain installation details.

NOTE: To prevent setting Diagnostic Trouble Codes (DTCs), make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connector.

  1. Torque : 20 Nm

Installation

  1. To install, reverse the removal procedure.


Copyright © Ford Motor Company