303-14A Electronic Engine Controls - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma 2014 Fiesta
Removal and Installation Procedure revision date: 04/18/2013

Catalyst Monitor Sensor

Removal

  1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).

Manual transmission vehicles

All vehicles

  1. NOTE: Manual transmission shown, automatic transmission similar.

    Material : Penetrating and Lock Lubricant / XL-1

Installation

All vehicles

  1. NOTE: Manual transmission shown, automatic transmission similar.

    NOTE: The correct torque wrench setting must be calculated when using a commercially available exhaust gas sensor socket to install the catalyst monitor sensor. Refer to the Torque Wrench Adapter Formulas in the Appendix.

    Material : High Temperature Nickel Anti-Seize Lubricant / XL-2
    Torque : 48 Nm

Manual transmission vehicles



Copyright © Ford Motor Company