308-03A Manual Transmission - Vehicles With: 5-Speed Manual Transmission - B5/IB5 2014 Fiesta
Disassembly and Assembly of Subassemblies Procedure revision date: 04/26/2013

Output Shaft

DISASSEMBLY

NOTICE: Use vise jaws protectors.

  1. Clamp the shaft in a vise.
  1. Special Tool(s) : 205-071-01 Adapter for 205-071 (Thrust Pad)
    General Equipment : Bearing Separator

  1. NOTE: Note the position of each component before removal.

  1. NOTE: Note the position of each component before removal.

  1. Special Tool(s) : 204-158-01 Adapter for 204-158 (Thrust Pad)
    General Equipment : Bearing Separator

ASSEMBLY

NOTICE: Use vise jaws protectors.

  1. Clamp the shaft in a vise.

    1. NOTE: Make sure that a new component is installed.

    1. Special Tool(s) : 308-095 Installer, Input Shaft Bearing
      General Equipment : Hydraulic Press

    1. NOTE: Make sure that a new component is installed.

  1. NOTE: Make sure that these components are installed to the noted removal position.

  1. NOTE: Make sure that a new component is installed.

  1. NOTE: Make sure that these components are installed to the noted removal position.

  1. NOTE: Make sure that a new component is installed.

    1. NOTE: Make sure that a new component is installed.

    1. Special Tool(s) : 308-045 Installer, Transmission Extension Housing Bushing/Seal
      General Equipment : Hydraulic Press

    1. NOTE: Make sure that a new component is installed.



Copyright © Ford Motor Company