Fuel Lines

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the Fuel Tank.
   Refer to: Fuel Tank (310-01A Fuel Tank and Lines - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
   

1. Refer to: Spring Lock Couplings (310-00A Fuel System - General Information - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, General Procedures).
   Refer to: Quick Release Coupling (310-00A Fuel System - General Information - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, General Procedures).
   Torque : 17.5 Nm

1. Refer to: Quick Release Coupling (310-00A Fuel System - General Information - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, General Procedures).
   Torque : 17.5 Nm

Installation

1. To install, reverse the removal procedure.
   

1. Bleed the brake system.
   Refer to: Brake System Bleeding (206-00 Brake System - General Information, General Procedures).
   

Copyright © Ford Motor Company