Oil Pump

Removal

1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Remove the following items:
   1. Refer to: Crankshaft Front Seal (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
      
   2. Refer to: Oil Pan (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
      

1. NOTE: Note the different lengths of the bolts.

Installation

1. Torque :
     Stage 1:  6 Nm
     Stage 2:  10 Nm

1. NOTE: The O-ring is to be reused unless damaged.

1. Torque : 10 Nm

1. Install the following items:
   1. Refer to: Oil Pan (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
      
   2. Refer to: Crankshaft Front Seal (303-01A Engine - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
      

Copyright © Ford Motor Company