Generator - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma

Removal

1. WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
   

1. Refer to: Accessory Drive Belt (303-05A Accessory Drive - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
   

Installation

1. Torque : 10 Nm

1. NOTE: Install the nut and bolts finger-tight before torquing.

   Torque : 48 Nm

1. Torque : 15 Nm

1. Refer to: Accessory Drive Belt (303-05A Accessory Drive - 1.6L Duratec-16V Ti-VCT (88kW/120PS) - Sigma, Removal and Installation).
   

1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
   

Copyright © Ford Motor Company