501-20B Supplemental Restraint System	2014 Fiesta
Diagnosis and Testing	Procedure revision date: 05/6/2013

Airbag Supplemental Restraint System (SRS)

DTC Chart: Restraint Control Module (RCM)

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

RCM DTC Chart

DTC	Description	Action
B0001:11	Driver Frontal Stage 1 Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0001:12	Driver Frontal Stage 1 Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0001:13	Driver Frontal Stage 1 Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0001:1A	Driver Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0001:2B	Driver Frontal Stage 1 Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0001:4A	Driver Frontal Stage 1 Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0002:11	Driver Frontal Stage 2 Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0002:12	Driver Frontal Stage 2 Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0002:13	Driver Frontal Stage 2 Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0002:1A	Driver Frontal Stage 2 Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0002:2B	Driver Frontal Stage 2 Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0002:4A	Driver Frontal Stage 2 Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0004:11	Driver Knee Bolster Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0004:12	Driver Knee Bolster Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0004:13	Driver Knee Bolster Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0004:1A	Driver Knee Bolster Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0004:2B	Driver Knee Bolster Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0004:4A	Driver Knee Bolster Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0010:11	Passenger Frontal Stage 1 Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0010:12	Passenger Frontal Stage 1 Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0010:13	Passenger Frontal Stage 1 Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0010:1A	Passenger Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0010:2B	Passenger Frontal Stage 1 Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0010:4A	Passenger Frontal Stage 1 Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0011:11	Passenger Frontal Stage 2 Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0011:12	Passenger Frontal Stage 2 Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0011:13	Passenger Frontal Stage 2 Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0011:1A	Passenger Frontal Stage 2 Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0011:2B	Passenger Frontal Stage 2 Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0011:4A	Passenger Frontal Stage 2 Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0050:11	Driver Seatbelt Sensor: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0050:12	Driver Seatbelt Sensor: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0050:13	Driver Seatbelt Sensor: Circuit Open	REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0050:1D	Driver Seatbelt Sensor: Circuit Current Out of Range	REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0050:2B	Driver Seatbelt Sensor: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0050:4A	Driver Seatbelt Sensor: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0052:11	Passenger Seatbelt Sensor: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0052:12	Passenger Seatbelt Sensor: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0052:13	Passenger Seatbelt Sensor: Circuit Open	REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0052:1D	Passenger Seatbelt Sensor: Circuit Current Out of Range	REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0052:2B	Passenger Seatbelt Sensor: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0052:4A	Passenger Seatbelt Sensor: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007E:11	Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007E:12	Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007E:13	Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007E:1A	Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007E:2B	Driver Seatbelt Pretensioner "C" Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007E:4A	Driver Seatbelt Pretensioner "C" Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007F:11	Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007F:12	Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007F:13	Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007F:1A	Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007F:2B	Passenger Seatbelt Pretensioner "C" Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B007F:4A	Passenger Seatbelt Pretensioner "C" Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0082:11	Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0082:12	Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0082:13	Passenger Seatbelt Load Limiter Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0082:1A	Passenger Seatbelt Load Limiter Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0082:2B	Passenger Seatbelt Load Limiter Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0082:4A	Passenger Seatbelt Load Limiter Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00A0:09	Occupant Classification System: Component Failure	REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00A0:4A	Occupant Classification System: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00A0:63	Occupant Classification System: Circuit / Component Protection Time-Out	REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00A0:64	Occupant Classification System: Signal Plausibility Failure	REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00A0:68	Occupant Classification System: Event Information	REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00B5:11	Driver Seat Track Position Restraints Sensor: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00B5:12	Driver Seat Track Position Restraints Sensor: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00B5:13	Driver Seat Track Position Restraints Sensor: Circuit Open	REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00B5:1D	Driver Seat Track Position Restraints Sensor: Circuit Current Out of Range	REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00B5:2B	Driver Seat Track Position Restraints Sensor: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00B5:4A	Driver Seat Track Position Restraints Sensor: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C5:11	Passenger Seat Track Position Restraints Sensor: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C5:12	Passenger Seat Track Position Restraints Sensor: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C5:13	Passenger Seat Track Position Restraints Sensor: Circuit Open	REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C5:1D	Passenger Seat Track Position Restraints Sensor: Circuit Current Out of Range	REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C5:2B	Passenger Seat Track Position Restraints Sensor: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C5:4A	Passenger Seat Track Position Restraints Sensor: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00D5:11	Restraint System Passenger Disable Indicator: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00D5:12	Restraint System Passenger Disable Indicator: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00D5:13	Restraint System Passenger Disable Indicator: Circuit Open	REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00D5:4A	Restraint System Passenger Disable Indicator: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1193:00	Crash Event Storage Full and Locked: No Sub Type Information	This DTC indicates the vehicle has been in a crash. INSTALL a new RCM and impact sensors. REFER to: Inspection and Repair after a Supplemental Restraint System (SRS) Deployment (501-20B Supplemental Restraint System, General Procedures).
B11D8:12	Restraint Event Notification: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing).
B11D8:14	Restraint Event Notification: Circuit Short to Ground or Open	REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1404:11	Driver Side Airbag Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1404:12	Driver Side Airbag Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1404:13	Driver Side Airbag Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1404:1A	Driver Side Airbag Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1404:2B	Driver Side Airbag Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1404:4A	Driver Side Airbag Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1405:11	Driver Side Curtain Deployment Control 1: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1405:12	Driver Side Curtain Deployment Control 1: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1405:13	Driver Side Curtain Deployment Control 1: Circuit Open	REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1405:1A	Driver Side Curtain Deployment Control 1: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1405:2B	Driver Side Curtain Deployment Control 1: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1405:4A	Driver Side Curtain Deployment Control 1: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1407:11	Passenger Side Airbag Deployment Control: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1407:12	Passenger Side Airbag Deployment Control: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1407:13	Passenger Side Airbag Deployment Control: Circuit Open	REFER to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1407:1A	Passenger Side Airbag Deployment Control: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1407:2B	Passenger Side Airbag Deployment Control: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1407:4A	Passenger Side Airbag Deployment Control: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1408:11	Passenger Side Curtain Deployment Control 1: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1408:12	Passenger Side Curtain Deployment Control 1: Circuit Short to Battery	REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1408:13	Passenger Side Curtain Deployment Control 1: Circuit Open	REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1408:1A	Passenger Side Curtain Deployment Control 1: Circuit Resistance Below Threshold	REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1408:2B	Passenger Side Curtain Deployment Control 1: Signal Cross Coupled	REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1408:4A	Passenger Side Curtain Deployment Control 1: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1413:11	Driver Frontal Restraints Sensor: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: T (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1413:4A	Driver Frontal Restraints Sensor: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1413:81	Driver Frontal Restraints Sensor: Invalid Serial Data Received	INSTALL a new LH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1413:93	Driver Frontal Restraints Sensor: No Operation	REFER to: Pinpoint Test - DTC: T (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1413:96	Driver Frontal Restraints Sensor: Component Internal Failure	INSTALL a new LH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1414:11	Driver Side Restraints Sensor 1: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1414:4A	Driver Side Restraints Sensor 1: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1414:81	Driver Side Restraints Sensor 1: Invalid Serial Data Received	INSTALL a new driver door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1414:93	Driver Side Restraints Sensor 1: No Operation	REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1414:96	Driver Side Restraints Sensor 1: Component Internal Failure	INSTALL a new driver door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1415:11	Driver Side Restraints Sensor 2: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1415:4A	Driver Side Restraints Sensor 2: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1415:81	Driver Side Restraints Sensor 2: Invalid Serial Data Received	INSTALL a new LH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1415:93	Driver Side Restraints Sensor 2: No Operation	REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1415:96	Driver Side Restraints Sensor 2: Component Internal Failure	INSTALL a new LH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1417:11	Passenger Frontal Restraints Sensor: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1417:4A	Passenger Frontal Restraints Sensor: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1417:81	Passenger Frontal Restraints Sensor: Invalid Serial Data Received	INSTALL a new RH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1417:93	Passenger Frontal Restraints Sensor: No Operation	REFER to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1417:96	Passenger Frontal Restraints Sensor: Component Internal Failure	INSTALL a new RH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1418:11	Passenger Side Restraints Sensor 1: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1418:4A	Passenger Side Restraints Sensor 1: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1418:81	Passenger Side Restraints Sensor 1: Invalid Serial Data Received	INSTALL a new passenger door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1418:93	Passenger Side Restraints Sensor 1: No Operation	REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1418:96	Passenger Side Restraints Sensor 1: Component Internal Failure	INSTALL a new passenger door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1419:11	Passenger Side Restraints Sensor 2: Circuit Short to Ground	REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1419:4A	Passenger Side Restraints Sensor 2: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1419:81	Passenger Side Restraints Sensor 2: Invalid Serial Data Received	INSTALL a new RH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B1419:93	Passenger Side Restraints Sensor 2: No Operation	REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1419:96	Passenger Side Restraints Sensor 2: Component Internal Failure	INSTALL a new RH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B142D:00	Pyrotechnic End of Life Activation Performed: No Sub Type Information	INSTALL a new RCM and CARRY OUT PMI . Use As-Built data when carrying out PMI for this DTC . REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation).
B1469:4A	Unused Satellite Restraints Sensor 1: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
B146A:4A	Unused Satellite Restraints Sensor 2: Incorrect Component Installed	REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0028:08	Vehicle Communication Bus A: Bus Signal / Message Failures	REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0028:88	Vehicle Communication Bus A: Bus Off	REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0100:00	Lost Communication with ECM/PCM A: No Sub Type Information	REFER to: Pinpoint Test - DTC: II (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0154:00	Lost Communication with Restraints Occupation Classification System Module: No Sub Type Information	REFER to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0155:00	Lost Communication with Instrument Panel Cluster (IPC) Control Module: No Sub Type Information	REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0253:00	Lost Communication With Accessory Protocol Interface Module: No Sub Type Information	REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0300:00	Internal Control Module Software Incompatibility: No Sub Type Information	CARRY OUT PMI . RETRIEVE RCM Diagnostic Trouble Codes (DTCs). If RCM DTC U0300:00 is retrieved on-demand during self-test, INSTALL a new RCM . REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation).
U0401:00	Invalid Data Received From ECM / PCM A: No Sub Type Information	NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and PCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For PCM Diagnostic Trouble Codes (DTCs), Refer to the appropriate section in Group 303 for the procedure.
U0423:00	Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information	NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and IPC Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For IPC Diagnostic Trouble Codes (DTCs), REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes, Diagnosis and Testing).
U0423:81	Invalid Data Received From Instrument Panel Cluster Control Module: Invalid Serial Data Received	NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and IPC Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For IPC Diagnostic Trouble Codes (DTCs), REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes, Diagnosis and Testing).
U0554:00	Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information	CHECK for additional RCM and APIM Diagnostic Trouble Codes (DTCs). For RCM Diagnostic Trouble Codes (DTCs), RETURN to the beginning of this chart. For APIM Diagnostic Trouble Codes (DTCs). Refer to the appropriate section in Group 415 for the procedure.
U2100:00	Initial Configuration Not Complete: No Sub Type Information	CHECK vehicle history for recent service actions related to this module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the diagnostic scan tool using As-Built data.
U2101:00	Control Module Configuration Incompatible: No Sub Type Information	CARRY OUT PMI using As-Built data. RETRIEVE RCM Diagnostic Trouble Codes (DTCs). If RCM DTC U2101:00 is retrieved on-demand, INSTALL a new RCM . Use As-Built data when carrying out PMI for this DTC . REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation).
U2200:00	Control Module Configuration Memory Corrupt: No Sub Type Information	INSTALL a new RCM and CARRY OUT PMI using a diagnostic scan tool. Use As-Built data when carrying out PMI for this DTC . REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation).
U2300:55	Central Configuration: Not Configured	REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing).
U2300:64	Central Configuration: Signal Plausibility Failure	REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing).
U3000:46	Control Module: Calibration / Parameter Memory Failure	INSTALL a new RCM . Using a diagnostic scan tool, CARRY OUT PMI using As-Built data. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation).
U3000:49	Control Module: Internal Electronic Failure	INSTALL a new RCM . Using a diagnostic scan tool, CARRY OUT RCM PMI . If DTC U2200:00 is also present, use As-Built data when carrying out PMI for this DTC . REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation).
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	REFER to: Pinpoint Test - DTC: FF (501-20B Supplemental Restraint System, Diagnosis and Testing).
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	REFER to: Pinpoint Test - DTC: FF (501-20B Supplemental Restraint System, Diagnosis and Testing).

DTC Chart: Occupant Classification System Module (OCSM)

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

OCSM DTC Chart

DTC	Description	Action
B0061:11	Passenger Seatbelt Tension Sensor: Circuit Short To Ground	REFER to: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0061:12	Passenger Seatbelt Tension Sensor: Circuit Short To Battery	REFER to: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0061:13	Passenger Seatbelt Tension Sensor: Circuit Open	REFER to: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0061:1C	Passenger Seatbelt Tension Sensor: Circuit Voltage Out of Range	REFER to: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing).
B0061:49	Passenger Seatbelt Tension Sensor: Internal Electronic Failure	REFER to: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C0:11	Passenger Seat Occupant Classification Sensor "A": Circuit Short to Ground	INSPECT the OCS sensor pressure hose and pressure hose routing. VERIFY the hose is not twisted, pinched or damaged and that the hose is routed correctly. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). If a concern is found, REPAIR as needed. If no concern is found, CYCLE the ignition and REPEAT the OCSM self-test. If DTC B00C0:11 returns, INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B00C0:1A	Passenger Seat Occupant Classification Sensor "A": Circuit Resistance Below Threshold	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B00C0:49	Passenger Seat Occupant Classification Sensor "A": Internal Electronic Failure	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B00C1:11	Passenger Seat Occupant Classification Sensor "B": Circuit Short to Ground	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B00C1:12	Passenger Seat Occupant Classification Sensor "B": Circuit Short to Battery	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B00C1:49	Passenger Seat Occupant Classification Sensor "B": Internal Electronic Failure	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
B00C2:11	Passenger Seat Occupant Classification Sensor "C": Circuit Short to Ground	REFER to: Pinpoint Test - DTC: HH (501-20B Supplemental Restraint System, Diagnosis and Testing).
B00C2:12	Passenger Seat Occupant Classification Sensor "C": Circuit Short to Battery	REFER to: Pinpoint Test - DTC: HH (501-20B Supplemental Restraint System, Diagnosis and Testing).
B1193:00	Crash Event Storage Full and Locked: No Sub Type Information	CLEAR the OCSM Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC B1193:00 returns, INSTALL a new OCS sensor. INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
U0100:00	Lost Communication with ECM/PCM A: No Sub Type Information	REFER to: Pinpoint Test - DTC: II (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0151:00	Lost Communication with Restraints Control Module: No Sub Type Information	REFER to: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing).
U0401:00	Invalid Data Received from ECM/PCM A: No Sub Type Information	CARRY OUT the PCM self-test. REFER to the PC/ED manual or the appropriate workshop manual section. Refer to the appropriate section in Group 303 for the procedure.
U3000:46	Control Module: Calibration / Parameter Memory Failure	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
U3000:49	Control Module: Internal Electronic Failure	INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
U3000:54	Control Module: Missing Calibration	Using a diagnostic scan tool, CARRY OUT the OCS Reset. FOLLOW all instructions on the diagnostic scan tool. If the OCS Reset was not successful, VERIFY correct installation of the OCS . VERIFY the pressure sensor hose is correctly routed and CORRECT the installation as necessary. REPEAT the self-test. If DTC U3000:54 is still present, INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	REFER to: Pinpoint Test - DTC: FF (501-20B Supplemental Restraint System, Diagnosis and Testing).
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	REFER to: Pinpoint Test - DTC: FF (501-20B Supplemental Restraint System, Diagnosis and Testing).

Symptom Chart(s)

Symptom Chart: Supplemental Restraint System

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

Symptom Chart

Condition	Possible Sources	Actions
A module does not respond to the diagnostic scan tool	Fuse Diagnostic scan tool DLC Wiring, terminals or connectors Module	REFER to: Communications Network (418-00 Module Communications Network, Diagnosis and Testing).
Airbag Malfunction Service Now displays in the message center and the airbag warning indicator is not illuminated	SRS fault and/or airbag warning indicator fault	CARRY OUT the RCM and IPC self-tests. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For IPC Diagnostic Trouble Codes (DTCs), REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes, Diagnosis and Testing).
The airbag indicator is flashing	SRS fault	CARRY OUT the RCM and OCSM self tests. REFER to DTC Chart: RCM or REFER to DTC Chart: OCSM .
The airbag warning indicator is illuminated continuously	Fuse Wiring, terminals or connectors IPC RCM or OCSM	CARRY OUT the RCM and OCSM self tests. REFER to DTC Chart: RCM or REFER to DTC Chart: OCSM . If no Diagnostic Trouble Codes (DTCs) were retrieved from the RCM or OCSM , REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes, Diagnosis and Testing). If the OCSM or RCM does not respond to the diagnostic scan tool, REFER to: Communications Network (418-00 Module Communications Network, Diagnosis and Testing).